TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 552 of 704
TB 9-3950-253-13&P
Change 1
0052-42
0052
PLS SLIDER ASSEMBLY INSTALLATION – CONTINUED
WARNING
•
Lifting cables, chains, hooks, and slings used for lifting must be in good condition and of
suitable capacity.
•
Improper use of lifting equipment and improper attachment of cables may cause injury to
personnel and damage to equipment. Observe all standard rules of safety.
•
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device.
•
Failure to follow these warnings may result in injury or death to personnel.
NOTE
Slider assembly weighs 1,400 lb (635 kg).
4. Attach sling and lifting device to slider assembly. Loop one strap (Figure 40, Item 4) around center of beam
(Figure 40, Item 3) and two straps (Figure 40, Item 1) around right and left twistlocks (Figure 40, Item 2). Adjust
placement of straps until slider assembly is level when raised.
Figure 40.
Slider Assembly With Straps
052
1
2
4
3
2
Back to Top
