TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 551 of 704
0052-41
Change 1
TB 9-3950-253-13&P
0052
PLS SLIDER ASSEMBLY INSTALLATION
00052
NOTE
•
Hand tighten all bolts on installation. Reposition mounting blocks during slider assembly
installation.
•
Perform steps 1 through 3 for both right and left sides.
1. Place mounting block (Figure 39, Item 1) on slider support bracket (Figure 39, Item 3) with holes (Figure 39,
Item 2) offset to outside of vehicle, aligning holes in mounting block with holes in slider support bracket.
2. Apply thread adhesive to three bolts.
3. Install three washers (
Figure 39
, Item 4) and bolts (
Figure 39
, Item 5) in
slider
support bracket
(
Figure 39
, Item 3).
Figure 39.
PLS Slider Mounting Block Installation.
052
Table 4.
Parts List for PLS Slider Assembly Installation.
ITEM NO.
052
QTY
052
DESCRIPTION
052
PART NUMBER
052
Figure 39, Item 1
2
Mounting Block
112090401
Figure 39, Item 4
6
3/4 Washer
112080102
Figure 39, Item 5
6
3/4-10 x 2 Bolt
112079703
Figure 41, Item 1
1
slider assembly
111589501
Figure 41, Item 3
8
9/16 Washer
112080109
Figure 41, Item 4
8
9/16-12 x 2 Bolt
112079719
1
2
3
4,5
1
Back to Top
