TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 46 of 266
TM 9–1200–215–34&P
2–11
2–13.
TOP PANEL MAINTENANCE INSTRUCTIONS
DESCRIPTION
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Tool Kits, JTK–17LAL, TK–101/G, or TK–105/G
(items 34, 35, & 36, Appendix E)
Torque Wrench, 0–75 in.–lb (item 40, Appendix E)
#2 Crosstip Screwdriver Socket Wrench
(item 22, Appendix E)
Equipment Conditions:
Unenergized ACU is on workbench
Personnel Required:
One MOS 35Y
a.
REMOVAL
CAUTION
ESD SENSITIVE
The ACU contains ESD sensitive
components. Wear a protective
ESD wrist strap whenever handling
components. Failure to comply may
result in damage to equipment.
NOTE
It is not necessary to remove the
hard disk drive access cover before
removing front cover.
1.
Attach ESD grounding strap to wrist and
ground to ensure ESD protection.
2.
Remove top panel (1) by removing 24 screws
(2) and 24 flat washers (3).
Lift top panel from
housing.
3
2
1
Back to Top
