TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 44 of 266
TM 9–1200–215–34&P
2–9
2–12.
HARD DISK DRIVE AND COVER MAINTENANCE INSTRUCTIONS CONTINUED
a.
REMOVAL CONTINUED
NOTE
Screw and seal are a unit.
They
cannot be requisitioned separately.
4.
Remove hard disk drive (5) by removing four
screws with seals (6) from side of ACU.
Discard screw with seal.
5.
Pull hard disk drive (5) out of ACU by handle.
b.
INSTALLATION
CAUTION
ESD SENSITIVE
The ACU contains ESD sensitive
components. Wear a protective
ESD wrist strap whenever handling
components. Failure to comply may
result in damage to equipment.
1.
Attach ESD grounding strap to wrist and
ground to ensure ESD protection.
2.
Install hard disk drive (5) into ACU.
3.
Insert four new screws with seals (6) into side
of ACU, securing hard disk drive (5).
Torque
screws to 10 in.–lb (1.1 N
S
m).
CAUTION
The EMI shielding gasket is vital to
this piece of equipment and is easily
damaged.
Handle cover with care
when removing or replacing it.
Failure to comply may result in
damage to equipment.
4.
Place cover (1) into position and align holes.
1
5
6
Change 1
Back to Top
