TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 52 of 266
TM 9–1200–215–34&P
2–17
2–15.
1553 CCA MAINTENANCE INSTRUCTIONS CONTINUED
b.
INSTALLATION
CAUTION
ESD SENSITIVE
The ACU contains ESD sensitive
components. Wear a protective
ESD wrist strap whenever handling
components. Failure to comply may
result in damage to equipment.
1.
Attach ESD grounding strap to wrist and
ground to ensure ESD protection.
2.
Install 1553 CCA (2) onto backplane at
connector J8 (5) in ACU housing.
3.
Insert screw (3) and flat washer (4) into
holddown of 1553 CCA (2). Torque screws to 5
in.–lb (0.6 N
S
m).
4.
Remove tags and connect two channel
connectors (1) to J1 and J2 connectors located
on end of 1553 CCA.
5.
Install stabilizer brackets in accordance with
procedure outlined in paragraph 2–14.
1
2
3
4
5
Back to Top
