TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 59 of 266
TM 9–1200–215–34&P
2–24
2–18.
CPU CCA MAINTENANCE INSTRUCTIONS
DESCRIPTION
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Tool Kits, JTK–17LAL, TK–101/G, or TK–105/G
(items 34, 35, & 36, Appendix E)
Torque Wrench, 0–75 in.–lb (item 40, Appendix E)
Torque Wrench, 0–15 in.–lb (item 39, Appendix E)
#1 Crosstip Screwdriver Socket Wrench (item 21,
Appendix E)
Materials/Parts:
Lockwasher (item 1, Appendix F)
Bag, Plastic (item 6, Appendix D)
Box, Shipping (item 8, Appendix D)
Equipment Conditions:
Stabilizer brackets removed; if not, remove stabilizer
brackets in accordance with procedure in para-
graph 2–14.
Personnel Required:
One MOS 35Y
a.
REMOVAL
CAUTION
ESD SENSITIVE
The ACU contains ESD sensitive
components. Wear a protective
ESD wrist strap whenever handling
components. Failure to comply may
result in damage to equipment.
1.
Attach ESD grounding strap to wrist and
ground to ensure ESD protection.
2.
Remove two insulating blocks (1) by removing
three screws (2), three lockwashers (3), and
three flat washers (4).
Discard lockwashers.
1
1
2
3
4
4
3
2
Back to Top
