TM-9-1240-401-34-P
TELESCOPE MOUNT M146: M118A2 AND M118A3; TELESCOPE MOUNT M145: M145A1; PANORAMIC TELESCOPE: M117 AND M117A2; FIRE CONTROL QUADRANT: M15; PERISCOPE: M42
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
JULY 1993
TM-9-1240-401-34-P - Page 326 of 590
TM 9-1240-401-34&P
7-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
Special tools, TMDE, and support equipment required and authorized for repair of the linkage assembly are listed in
the repair parts and special tools list, appendix D. Fabricated tools are listed in appendix C.
7-3. REPAIR PARTS
Repair parts are listed and illustrated in the repair parts and special tools list, appendix D.
Section Il. Inspections
7-4. GENERAL
a.
Inspection is performed primarily to determine the following:
(1)
(2)
(3)
(4)
(5)
b.
The
(1)
(2)
(3)
Completeness.
The nature of serviceability.
The work, repair parts, and supplies required to return the
That the work in process is being performed properly.
That completed work complies fully with serviceability standards.
linkage assembly is considered serviceable when:
It is complete and properly performs its intended function.
All modification work orders (MWO's) have been applied.
All defects disclosed by the inspection have been corrected.
c.
DA Form 2408-5 and DA Form 2409 list applicable MWO's.
to serviceability.
7-5. CATEGORIES OF INSPECTION
Categories of inspection define responsibilities:
An initial inspection (ref. para 7-6) is performed immediately on receipt of the linkage
inspection will determine the amount and type of work to be performed.
assembly for maintenance. This
7-2
Back to Top
