TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1152 of 1469
INSTALLATION - Continued
NOTE
•
Before installing lower steering column, ensure steering wheel spokes form a Y.
•
Assistant will steady steering wheel while universal joint is connected to steering gear.
18.
Position universal joint (Figure 5, Item 4) onto steering gear input shaft (Figure 5, Item 5). Ensure screw holes
in sleeve of universal joint align with groove in shaft.
19.
Install universal joint (Figure 5, Item 4) on input shaft (Figure 5, Item 5) with screw (Figure 5, Item 3), lockwasher
(Figure 5, Item 2), and nut (Figure 5, Item 1). Tighten nut 28 to 34 lb-ft (38 to 46
N·m).
5
4
3
1
2
M3210DAA
Figure 5.
Steering Gear Installation (M939A2).
END OF TASK
TM 9-2320-272-23-3
0500
0500-9
Back to Top
