REMOVAL
1.
Remove two cotter pins (Figure 3, Item 7), pins (Figure 3, Item 2), and shift lever shift rod (Figure 3, Item 4)
from shift lever (Figure 3, Item 1) and cross shaft lever (Figure 3, Item 6). Discard cotter pins.
2.
Loosen jamnut (Figure 3, Item 3) on shift lever shift rod (Figure 3, Item 4) and adjust clevis (Figure 3, Item 5)
until distance between centers of holes in clevises (Figure 3, Item 5) is 9-5/8 in. (24.4 cm).
3.
Tighten jamnut (Figure 3, Item 3).
7
6
2
5
4
2
1
5
7
9-5/8 IN. (24.4 CM)
M7049DAA
3
Figure 3.
Transfer Case Shift Lever Shift Rod Removal.
END OF TASK
TM 9-2320-272-23-3
0396
0396-5