TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 1012 of 1393
FIELD MAINTENANCE
REAR WINCH CABLE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP
0826, Table 1, Item 56)
Equipment Condition
Parking brake set. (TM 9-2320-272-10)
Rear winch cable unwound. (TM 9-2320-272-10)
REMOVAL
WARNING
Wear hand protection when handling winch cable. Do not handle cable with bare hands.
Broken wires may be sharp. Failure to comply may result in injury or death to personnel.
1.
Remove setscrew (Figure 1, Item 4) and cable (Figure 1, Item 2) from hole (Figure 1, Item 3) in winch drum
(Figure 1, Item 1).
M5254DAA
1
2
3
4
Figure 1.
Rear Winch Cable Removal.
TM 9-2320-272-23-4
0710
0710-1
Back to Top
