TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 1008 of 1393
INSTALLATION
1.
Thread cable end of cable (Figure 3, Item 4) over forward boom sheaves (Figure 3, Item 2) and through upper
boom roller (Figure 3, Item 7).
2.
Thread cable (Figure 3, Item 4) around upper rear sheaves (Figure 3, Item 9) and lower rear sheaves
(Figure 3, Item 8).
3.
Feed cable (Figure 3, Item 4) under boom (Figure 3, Item 1) to hoist winch drum (Figure 3, Item 5).
4.
Remove screw (Figure 3, Item 3), insert cable (Figure 3, Item 4) through hole (Figure 3, Item 6) in hoist winch
drum (Figure 3, Item 5), and install screw.
2
3
M9741DAA
1
4
4
6
5
7
4
2
5
1
9
8
Figure 3.
Hoist Winch Cable Installation.
TM 9-2320-272-23-4
0709
0709-5
Back to Top
