TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 1131 of 1393
INSTALLATION
1.
Install swivel bolt (Figure 3, Item 9) and cable end (Figure 3, Item 8) on PTO cable (Figure 3, Item 5).
2.
Install PTO cable swivel bolt (Figure 3, Item 9) on select lever (Figure 3, Item 10) with locknut
(Figure
3,
Item
1).
3.
Install shim (Figure 3, Item 4), PTO cable (Figure 4, Item 5), and clamp (Figure 3, Item 7) on PTO cable bracket
(Figure 3, Item 3) with two screws (Figure 3, Item 2) and locknuts (Figure 3, Item 6).
4.
Install PTO clevis (Figure 4, Item 9) on PTO cable (Figure 4, Item 10).
5.
Install shim (Figure 3, Item 4), PTO cable (Figure 3, Item 5), and clamp (Figure 3, Item 7) on PTO cable bracket
(Figure 3, Item 5) with two screws (Figure 3, Item 2) and locknuts (Figure 3, Item 6).
NOTE
Transfer case PTO cable can be adjusted at two points. Adjustments can be made at transfer
case select lever cable clevis or transfer case PTO select lever cable collar.
6.
Adjust PTO cable swivel bolt (Figure 4, Item 9) forward until aligned with transfer PTO select lever
(Figure
4,
Item
7). If necessary, reposition transfer PTO cable (Figure 4, Item 10) at PTO cable collar at cross-
shaft end of cable (Figure 4, Item 4).
1
2
3
4
5
6
7
8
9
10
M6095DAA
Figure 3.
Transfer Case PTO Control Cable Installation.
TM 9-2320-272-23-4
0726
0726-4
Back to Top
