TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 782 of 1348
REMOVAL - Continued
9.
Remove locking pin (Figure 6, Item 4) and pin (Figure 6, Item 2) from pulley support tube bracket (Figure 6,
Item 3) and extend pulley support tube (Figure 6, Item 5) from pulley support tube bracket until hole (Figure 6,
Item 1) in pulley support tube is aligned.
1
2
3
4
5
Figure 6.
Spare Tire Winch Removal.
10.
Install pin (Figure 6, Item 2) and locking pin (Figure 6, Item 4) in hole (Figure 6, Item 1) of pulley support tube
(Figure 6, Item 5) and pulley support bracket (Figure 6, Item 3).
11.
Remove locknut (Figure 7, Item 5), screw (Figure 7, Item 1), two washers (Figure 7, Item 2), pulley (Figure 7,
Item 3), and spacer (Figure 7, Item 4) from pulley support bracket (Figure 7, Item 7). Discard locknut.
2
4
3
2
1
5
6
7
8
9
10
11
Figure 7.
Spare Tire Winch Removal.
12.
Remove spacer (Figure 7, Item 4) from pulley (Figure 7, Item 3).
13.
Remove locknut (Figure 7, Item 11), screw (Figure 7, Item 6), two washers (Figure 7, Item 9), spacer (Figure
7, Item 8), and pulley support bracket (Figure 7, Item 7) from pulley support tube (Figure 7, Item 10). Discard
locknut.
14.
Remove locking pin (Figure 6, Item 4), pin (Figure 6, Item 2), and pull pulley support tube (Figure 6, Item 5)
from pulley support bracket (Figure 6, Item 3).
TM 9-2330-342-23&P
0091
0091-4
Back to Top
