TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 786 of 1348
INSTALLATION - Continued
NOTE
Perform Step (11) if flanged bearing was removed.
11.
Install flanged bearing (Figure 14, Item 3) on winch rod assembly (Figure 14, Item 2).
1
4
5
3
2
Figure 14.
Spare Tire Winch Installation.
12.
Install winch rod assembly (Figure 14, Item 2) through frame (Figure 14, Item 4) and position end in winch
shaft (Figure 15, Item 3).
13.
Install two screws (Figure 14, Item 1) and locknuts (Figure 14, Item 5) on frame (Figure 14, Item 4).
14.
Install screw (Figure 15, Item 4) through winch rod assembly (Figure 15, Item 2) and winch shaft (Figure 15,
Item 3) and install locknut (Figure 15, Item 1).
4
3
2
1
Figure 15.
Spare Tire Winch Installation.
15.
Install cable (Figure 16, Item 1) on lift assembly (Figure 16, Item 3) with screw (Figure 16, Item 2) and locknut
(Figure 16, Item 4).
TM 9-2330-342-23&P
0091
0091-8
Back to Top
