TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 979 of 1348

FIELD MAINTENANCE

SUSPENSION HANGER ASSEMBLY REPLACEMENT (REAR)

INITIAL SETUP:

Tools and Special Tools

Jack, Dolly Type Hydraulic (WP

0194, Table 1,

Item 24)

Trestle (Jackstand), 7 Ton (2) (WP

0194, Table 1,

Item 15)

Lifting Device, Minimum Capacity 270 lbs (123 kg)

Socket Set, 3/4 In. (WP

0194, Table 1, Item 35)

Tool Kit, General Mechanic's: Automotive

(WP

0194, Table 1, Item 47)

Wrench, Combination, 1-1/2" (WP

0194, Table 1,

Item 42)

Wrench, Torque, Click, Ratcheting, 3/4" Drive, 600

ft-lb (WP

0194, Table 1, Item 42)

Materials/Parts

Locknut Qty:

16 (WP

0195, Table 1, Item 67)

Materials/Parts (cont.)

Screw Qty:

16 (WP

0195, Table 1, Item 13)

Washer Qty:

16 (WP

0195, Table 1, Item 48)

Personnel Required

Wheeled Vehicle Mechanic (2)

References

Fig. 30 (WP

0165)

Equipment Condition

Wheels chocked (TM 9-2330-342-10). (WP

0190)

Spring assemblies removed. (WP

0118)

REMOVAL

WARNING

The suspension hanger assembly weighs 270 lbs (123 kg). Attach a suitable lifting device

prior to removal. Failure to comply may result in injury or death to personnel.

NOTE

An assistant is required for entire task.

1.

Support trailer frame (Figure 1, Item 5) on jackstands.

TM 9-2330-342-23&P

0120

0120-1