TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 975 of 1348
REMOVAL - Continued
7
8
6
1
2
3
4
5
Figure 2.
Spring (Axle No. 1) Removal.
7.
Remove bushing (Figure 2, Item 6) from spring hanger (Figure 2, Item 5). Discard bushing.
NOTE
Perform Step (8) if grease fittings were damaged.
8.
Remove grease fitting (Figure 2, Item 7) from pin (Figure 2, Item 8). Discard grease fitting.
9.
Repeat Steps (1) through (8) for opposite side front spring.
END OF TASK
INSTALLATION
1.
Install bushing (Figure 3, Item 6) in spring hanger (Figure 3, Item 5).
7
8
6
1
2
3
4
5
Figure 3.
Spring (Axle No. 1) Installation.
TM 9-2330-342-23&P
0119
0119-3
Back to Top
