TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 993 of 1348

MARKING

Refer to AR 746-1

(WP

0190)for Marking of Supplies for Shipment.

END OF TASK

PREPARATION AFTER RAIL SHIPMENT

1.

Remove locking pin (Figure 3, Item 4) from reinforcement plate (Figure 3, Item 5).

1

2

3

4

5

6

7

9

10

11

13

12

8

Figure 3.

Preparation After Rail Shipment.

2.

Remove transport pin (Figure 3, Item 1) from hole (Figure 3, Item 11) in flatrack (Figure 3, Item 6), hole (Figure

3, Item 2) in reinforcement plate (Figure 3, Item 5), and hole (not shown) in trailer rail (Figure 3, Item 9).

3.

Install transport pin (Figure 3, Item 1) on bracket (Figure 3, Item 12) and clip (Figure 3, Item 13).

4.

Remove reinforcement plate (Figure 3, Item 5) from holes (Figure 3, Item 10) in trailer chassis (Figure 3, Item

8).

5.

Install reinforcement plate (Figure 3, Item 5) on studs (Figure 3, Item 7) with two locknuts (Figure 3, Item 3).

6.

Install locking pin (Figure 3, Item 4) on reinforcement plate (Figure 3, Item 5).

7.

Repeat Steps (1) through (6) for remaining transport pin (Figure 3, Item 1).

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheels chocks (TM 9-2330-342-10). (WP

0190)

END OF TASK

END OF WORK PACKAGE

TM 9-2330-342-23&P

0123

0123-3/4 blank