TM-9-2330-356-14

SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1990

TM-9-2330-356-14 - Page 230 of 528

TM 9-2330-356-14

(2) Inspect camshaft for twists and bends.

(3) Inspect inner and outer retainers for bends

and cracks.

(4) Inspect spider bushing and camshaft bushing

for cracks and excessive wear.

(5) Replace all parts which are not in good

condition.

c.

Installation.

(1) Assemble camshaft bushing, two preformed

packings, and inner and outer retainers to bracket in order

shown.

(2) Install four screws, four washes, and four

nuts to secure camshaft bushing assembly to the bracket.

Tighten four nuts.

(3) Install spider bushing.

Figure 4-76. Brake Camshaft Removal and Installation (M967A1, M969A1, and M970A1 including M970 SN

TC-0843, TC-0844, and TC-103 thru TC-178).

4-94

Change 3