TM-9-2330-356-14
SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL
OCTOBER 1990
TM-9-2330-356-14 - Page 73 of 528
TM 9-2330-356-14
(9) Release lock on hose reel (para 2-11) and
unreel hose.
(10) Insert nozzle into vehicle fuel tank/container.
Squeeze nozzle trigger to start flow.
(11) At end of operation, release nozzle trigger
and remove nozzle from vehicle fuel tank/container.
(12) Idle down engine to 1000-1200 rpm.
(13) Rewind the hose(s) (para 2-11). Tighten hose
reel lock(s).
(14) Close all valves.
(15) Stop engine (para 2-10d).
(16) Disconnect and rewind the static ground wire.
(17) Store and cover fire extinguishers.
d.
Hose Evacuation (M970 and M970A1).
To purge
or remove fuel from the dispensing system, use the
following procedure. This procedure must be done after
every operation using the dispensing hoses (fig. 2-29).
(1) Review instructions in paragraph 2-8.
(2) Ensure that all valves are closed.
(3) Remove fire extinguishers and bring to point
of operation.
(4) Start engine (para 2-10). When engine is
warm, adjust to idle speed (1000-1200 rpm).
Figure 2-29. Hose Evacuation Flow Diagram (M970 and M970A1).
2-31
Back to Top
