TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 361 of 783

TM 9-2350-260-20-1-3

ENGINE WIRING HARNESS REPLACEMENT (2A ENGINE)(Sheet 13 of 13)

25. Install seven clamps (AR) onto wiring harness.

Using 3/4 inch socket, install and tighten nuts securing clamps (AG).

26. Install five clamps (AS) onto wiring harness.

Using 3/4 inch wrench, install and tighten nuts securing clamps (AS).

27. Install clamp (AT) onto wiring harness.

Using 3/4 inch socket, install and tighten nut securing clamp (AT).

28. Install clamp (AU) and using 7/16 inch wrench, install and tighten screw securing clamp (AU).

29. Install powerplant (page 5-14).

End of Task

TA147381

10-349