TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 365 of 783

TM 9-2350-260-20-1-3

ENGINE WIRING HARNESS REPLACEMENT (2D ENGINE)(Sheet 4 of 12)

17. Using

spanner

wrench,

disconnect

electrical

connector (V).

18. Using cross-tip screwdriver and adjustable wrench,

remove four screws, lockwashers, and nuts (W).

Throw lockwashers away.

19. Remove cable connector (X) from bracket.

20. Using 1/2 inch socket, remove screw and lockwasher (Y).

Throw lockwasher away.

21. Remove clamp (Z).

22. Using 1/2 inch socket with extension, remove nut (AA)

securing clamp (hidden).

23. Remove clamp.

24. Disconnect electrical connector (AB) from engine oil

pressure switch (AC).

25. Disconnect electrical connector (AD) from engine oil

pressure transmitter (AE).

26. Disconnect electrical connector (AF) from engine oil

temperature thermostatic switch (AG).

27. Disconnect electrical connector (AH) from engine oil temperature transmitter (AJ).

28. Using 7/16 inch socket and wrench, remove three screws, lockwashers, and nuts (AK).

Throw lockwashers away.

29. Remove three clamps (AL).

Go on to Sheet 5

TA147385

10-353