TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 362 of 783

TM 9-2350-260-20-1-3

ENGINE WIRING HARNESS REPLACEMENT (2D ENGINE)(Sheet 1 of 12)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

10-351

Installation

10-356

TOOLS:

Spanner wrench

Cross-tip screw driver

3/8 in. combination box and

Flat-tip screwdriver

open end wrench

Slip joint pliers

3/4 in. combination box and

Diagonal cutting pliers

open end wrench

Adjustable wrench

7/8 in. combination box and

9/16 in. combination box and

open end wrench

open end wrench

1 in. open end wrench

1-1/8 in. combination box and open end wrench

7/16 in. socket with 1/2 in. drive

1/2 in. socket with 1/2 in. drive

2 in. extension with 1/2 in. drive

Ratchet with 1/2 in. drive

SUPPLIES:

Silicone compound (Item 32, Appendix D)

Lockwasher (MS35335-34) (4 required)

Lockwasher (7410218) (3 required)

Lockwasher (11657469-3) (14 required)

Lockwasher (MS45904-76) (2 required)

Lockwasher (MS35338-43) (4 required)

Lockwasher (MS35338-45) (2 required)

PRELIMINARY PROCEDURE:

Remove powerplant (page 5-27)

TA147382

10-350