TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 363 of 783

TM 9-2350-260-20-1-3

ENGINE WIRING HARNESS REPLACEMENT (2D ENGINE)(Sheet 2 of 12)

REMOVAL:

1.

Using flat-tip screwdriver and 3/8 inch wrench,

remove four screws, lockwashers, and nuts (A).

Throw lockwashers away.

2.

Remove engine harness (B) from mounting bracket

(C).

3.

Using 7/16 inch socket, remove eight screws (D) and

lockwashers (E) securing four clamps (F).

Throw

lockwashers away.

4.

Remove four clamps (G) from engine.

NOTE

Engine wiring harness is wrapped,

while other two harness leads are

covered with insulation.

5.

Separate and remove engine wiring harness (B)

from top of engine.

Go on to Sheet 3

TA147383

10-351