TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 364 of 783

TM 9-2350-260-20-1-3

ENGINE WIRING HARNESS REPLACEMENT (2D ENGINE)(Sheet 3 of 12)

6.

Using slip joint pliers and hands to loosen, disconnect electrical lead (CKT 86/GND)(G) from ignition unit (H).

7.

Using 1/2 inch socket, remove nut and lockwasher (J) securing clamp (hidden).

Throw lockwashers away.

8.

Remove clamp from wiring harness (B).

9.

Using 1/2 inch socket, remove screw and

lockwasher (K).

Throw lockwasher away.

10. Remove clamp (L) from electrical wiring harness (B).

11. Using 1/2 inch socket, remove screw and

lockwasher (M) securing ground lead (N).

Throw

lockwasher away.

12. Using 1/2 inch socket, remove screw and lockwasher (P).

Throw lockwasher away.

13. Remove clamp (Q) from wiring harness (B).

14. Using 1/2 inch socket, remove screw and lockwasher (R).

Throw lockwasher away.

15. Remove clamp (S) from engine wiring harness (B).

16. Using 1 inch wrench, disconnect electrical connector (T) from generator (U).

Go on to Sheet 4

TA147384

10-352