TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 630 of 783

TM 9-2350-260-20-1-3

ROADWHEEL ARM REPLACEMENT (Sheet 7 of 7)

8.

Position retainer (E) so that its jackscrew holes are

at top and bottom of upper spindle.

9.

Using pin punch, aline six mounting holes in retainer

(E) to holes in housing.

10. Put six new lockwasher and screws (G) into

mounting holes.

11. Using crowfoot wrench and torque wrench, tighten

six screws (G) alternately and evenly to 95-125 lb-ft

(129-169 N

•

m).

12. Connect adjusting link at No. 1 roadwheel position, if

necessary (page 14-59).

13. Install shock absorbers if roadwheel arms were

removed from positions No. 1, 2, and 6

(page 14-96).

14. Install suspension torsion bar (page 14-27).

End of Task

TA147809

14-8