TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 839 of 1008

TM 9-2350-261-20-2

REPLACE UPPER ACCELERATOR LINKAGE

0399 00

THIS WORK PACKAGE COVERS:

Removal (page 0399 00-1).

Installation (page 0399 00-3).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Screwdriver Set (WP 0780 00, Item 65)

Socket Wrench Set (WP 0780 00, Item 96)

Torque Wrench (WP 0780 00, Item 102)

Materials/Parts

Antiseize compound (WP 0782 00, Item 8)

Grease (WP 0782 00, Item 24)

Cotter pin (2)

Locknut (3)

Lockwasher (3)

Personnel Required

Unit Mechanic

References

WP 0401 00

WP 0120 00

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

Power plant rear access panel removed (WP 0431 00,

WP 0432 00, or WP 0433 00)

REMOVAL

1.

Remove locknut (1) and screw (2). Disconnect throttle link (3) from governor throttle arm (4). Discard locknut.

2.

Loosen screw (5). Remove governor throttle arm (4) from governor (6).

3.

Remove cotter pin (7), washer (8), spring (9), and throttle link (3) from pin (10). Discard cotter pin.

4.

Remove locknut (11) and screw (12). Disconnect throttle link (13) from bracket assembly (14). Discard locknut.

039900-1