TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 840 of 1008

TM 9-2350-261-20-2

REPLACE UPPER ACCELERATOR LINKAGE — Continued

0399 00

5.

Disconnect fuel hose (15) from tee (16).

6.

Remove nut (17) and washer (18) that secure tee (16) to bracket assembly (14).

7.

Remove cotter pin (19), washer (20) and pin (10) from bracket assembly (14). Discard cotter pin.

8.

Remove locknut (1) and screw (2) from bracket assembly (3). Use cross-tip screwdriver. Discard locknut.

9.

Before removing screw (4), raise inner transfer shaft (5) high enough to tilt the outer transfer shaft (6).

10. Remove screw (4) and lockwasher (7) from bracket assembly (3). Discard lockwasher.

11. Remove two screws (8), lockwashers (9), nuts (10), and bracket assembly (3) from power plant. Discard lockwashers.

0399 00-2