TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 844 of 1008

TM 9-2350-261-20-2

REPAIR UPPER ACCELERATOR LINKAGE — Continued

0400 00

INSPECTION-ACCEPTANCE AND REJECTION CRITERIA

1.

Check links, shafts, and brackets for wear and damage. Replace if needed.

ASSEMBLY

NOTE

Lubricate bearing surfaces of shafts before assembly. Use GAA grease.

1.

Place outer transfer shaft (4) in transfer shaft bracket (5).

2.

Insert inner transfer shaft (3) into outer transfer shaft (4).

3.

Secure shaft (3) to bracket (5) with screw (2) and new locknut (1).

FOLLOW-THROUGH STEPS

1.

Install upper accelerator linkage (WP 0399 00).

END OF TASK

0400 00-2