TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 851 of 1008

TM 9-2350-261-20-2

ADJUST ACCELERATOR AND TRANSMISSION THROTTLE VALVE

LINKAGE — Continued

0401 00

ADJUST UPPER ACCELERATOR PEDAL DETENT STOP

1.

Loosen locknut (1). Adjust stop screw (2) so detent plunger (3) will contact stop screw at full throttle position.

2.

With pedal (4) in full throttle position, travel spring (5) should be compressedsoagapof1/64to3/64inch(0

.4to

1.0 mm) exists between pivot pin (6) and rod stop (7).

3.

Adjust upper accelerator pedal toe stop. See ADJUST UPPER ACCELERATOR PEDAL TOE STOP Steps 1 - 4.

040100-7