TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 850 of 1008

TM 9-2350-261-20-2

ADJUST ACCELERATOR AND TRANSMISSION THROTTLE VALVE

LINKAGE — Continued

0401 00

ADJUST IDLE STOP

1.

Place throttle arm (1) at idle position and upper accelerator pedal (2) against heel stop.

2.

Align holes in accelerator pedal link (3) and bellcrank (4) so screw (5) will pass through freely.

3.

Lengthen accelerator pedal link (3) by turning bearing end (6) one turn to the left.

4.

Install accelerator pedal link (3) on bellcrank (4). Secure with screw (5) and nut (7).

5.

Tighten locknut (8) on accelerator pedal link (3).

6.

Adjust upper accelerator pedal detent stop. See ADJUST UPPER ACCELERATOR PEDAL DETENT STOP Steps 1 - 2.

0401 00-6