TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 519 of 932

TM 9-2350-261-20-3

REPLACE RAMP LOCK HANDLE AND ARMS — Continued

0557 00

4.

Remove two screws (1), washers (2), and nuts (3) from ramp lock handle (4).

5.

Remove arms (5) and (6) from handle (4).

6.

Remove two keys (7) from arms (5) and (6). Remove supports (8) and (12) from arms.

7.

Remove two spring pins (9), spring (10), and catch (11) from handle (4). Discard spring pins.

INSTALLATION

1.

Install catch (11) and spring (10) in ramp lock handle (4). Secure with two new spring pins (9).

2.

Install one support (8) on arm (5) and three supports (12) on arm (6).

3.

Install two keys (7) in arms (5) and (6).

4.

Install arms (5) and (6) in handle (4). Secure with two screws (1), washers (2), and nuts (3).

055700-3