TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 522 of 932

TM 9-2350-261-20-3

REPLACE RAMP LINKAGE (M113A2, M901A1, AND M1059 ONLY) — Continued

0558 00

REMOVAL

NOTE

Some carriers are equipped with flat shaped ramp lock rods while other carriers are equipped

with hex shaped ramp lock rods. They are removed and installed differently, as described below.

NOTE

Removal and installation of ramp linkage is the same for both sides of carrier. Text is for

onesideonly

.

1.

Remove cotter pin (1), headed pin (2), and connecting link (3) from arm (4). Discard cotter pin.

2.

Remove cotter pin (5), headed pin (6), and connecting link (3) from clevis (7). Discard cotter pin.

NOTE

Clevis (8) and one end of hex shaped rod (9) have left-hand threads.

3.

Remove clevis (7) from flat shaped rod (10), or clevis (8) from hex shaped rod (9).

0558 00-2