TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 520 of 932

TM 9-2350-261-20-3

REPLACE RAMP LOCK HANDLE AND ARMS — Continued

0557 00

5.

Align four supports (8) and (12) with holes in hull top plate. Shim with steel washers (13). Make sure you put the same

number of steel washers in same position from which they were removed.

6.

Secure with eight new key washers (14) and screws (15). Bend keys on washers to secure screws.

7.

Align two connecting links (16) with two arms (5) and (6). Secure with two headed pins (17) and new cotter pins (18).

FOLLOW-THROUGH STEPS

1.

Raise and lock ramp to check that ramp lock linkage works right (see your -10).

2.

Adjust ramp lock linkage, if needed (WP 0558 00 or WP 0560 00).

END OF TASK

0557 00-4