TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 875 of 1275

TM9-2350-311-20-1

9-8 STEERING CONTROL LINKAGE — CONTINUED

e. Adjustment — Continued

2

3

4

5

Remove two pins (14 and 24) to disconnect rod assembly (27). Loosen two nuts (57).

Increase end-to-end rod length by turning two rod ends (59). Install rod assembly (27) with two pins (14 and

24). Tighten two nuts (57).

Turn steering wheel (34) full right and hold. Check for contact between rod end (59) and top of bulkhead hole.

If interference exists, go to step 5. If no interference exists, go to step 10 and adjust location of boot (28).

Remove two pins (14 and 24) to disconnect rod assembly (27). Loosen two nuts (57).

9-20