TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 878 of 1275

TM9-2350-311-20-1

6 Remove screw (19), Iockwasher (20), and shift control outer tube (21). Discard Iockwasher.

7 Remove screw (22), Iockwasher (23), cotter pin (24), flat washer (25), pin (26), and shift control outer rod (27).

Discard Iockwasher and cotter pin.

8 Remove screw (28), Iockwasher (29), flat washer (30), bell crank (31), and spacer (32). Discard Iockwasher.

9 Remove screw (33), flat washer (34), and lever (35).

b. Disassembly

1 Loosen two nuts (36).

2 Remove two rod ends (37) and two nuts (36) from rod (38).

3 Remove pin (39) and handle (40) to disassemble shift control. Remove three screws (41), three Iockwashers

(42), two machine screws (43), two Iockwashers (44), cover (45), and shift guide (46). Discard Iockwashers.

4 Remove two springs (47), two pins (48), and lever (49).

9-23