TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 887 of 1275

TM9-2350-311-20-1

9-10 SERVICE AND PARKING BRAKE LINKAGE

— CONTINUED

b. Disassembly

1

2

3

4

5

Remove pin (25) and T-handle (26) from end of rod (27).

Remove mounting bracket (28), two flat washers (29), and spring (30).

Remove pin (31) and collar (32). Remove cotter pin (33), two flat washers (34), and spring (35). Discard cotter

pin.

Remove screw (36), Iockwasher (37), flat washer (38), bell crank (39), and rod guide (40) from rod (27).

Discard Iockwasher.

Remove flat washer (41).

NOTE

Removal of nuts from rod ends is not necessary.

6 Remove two nuts (42). Loosen and unscrew rod (27) ends from nut (43).

9-32