TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 896 of 1275

TM9-2350-311-20-1

3 Remove screw (9), washer (10), and throttle control lever (8).

4 Remove quick-release pin (11) at bell crank (12).

5 Remove cotter pin (13) and two flat washers (14) from end of governor control rod assembly (15). Discard

cotter pin.

6 Remove two cotter pins (16), two flat washers (17), two pins (18), and bell crank (3). Discard cotter pins.

7 Remove rod assembly (19).

8 Remove cotter pin (20) and pin (21) at bell crank (12). Discard cotter pin.

9 Remove bell crank (12).

10 Remove two cotter pins (22), two flat washers (23), and two pins (24) at rod assembly (25). Discard cotter pins.

11 Remove rod assembly (25).

12 Remove three screws (26), three Iockwashers (27), three flat washers (28), and bracket assembly (29) from

hull bulkhead. Discard Iockwashers.

9-41