TM-9-2350-311-20-1
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS
AUGUST 1994
TM-9-2350-311-20-1 - Page 898 of 1275
18 Remove spring (43), two screws (44), two Iockwashers (45), two flat washers (46), and mounting bracket (47)
at support bracket. Discard Iockwashers.
19 Twist pedal and shaft assembly (48) to clear support bracket and withdraw from bulkhead bore to remove.
b. Disassembly
1 Loosen nut (49) and remove after unscrewing rod ends (50) from shaft (51) to disassemble rod assemblies.
2 Remove two spring pins (52), shaft (53), lever (54), bell crank (55), and bracket (56) to disassemble bracket
assembly (57). Remove bearings (58) if damaged or worn. Discard spring pins.
3 Remove two screws (59) and two Iockwashers (60) and disassemble bracket support assembly (61). Remove
cap (62) and bearing (63) from bracket (64). Discard Iockwashers.
4 Remove three screws (65) and three Iockwashers (66). Remove cap (67) and bearing (68) from bracket (69).
Discard Iockwashers.
TM9-2350-311-20-1
9-43
Back to Top
