TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 903 of 1275

TM 9-2350-311-20-1

9-11 ACCELERATOR, THROTTLE, AND ENGINE CONTROL GOVERNOR — CONTINUED

d. Installation — Continued

14

15

16

17

18

Install two flat washers (14) and new cotter pin (13) at end of rod assembly (15) at engine throttle control lever

(8).

Install quick-release pin (11) at bell crank (12).

Install throttle control lever (8), washer (10), and screw (9) if damaged or requiring replacement at

transmission.

install rod assembly (7), spring (6), three flat washers (5), and two new cotter pins (4)

(8).

Install pin (2) and new cotter pin (1) at bell crank (3) to install linkage in powerplant.

at throttle control lever

9-48