TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 900 of 1275

TM 9-2350-311-20-1

5 Install cap (67) and bearing (68) onto bracket (69). Install three new lockwashers (66) and three screws (65).

6 Install two screws (59), two new lockwashers (60), cap (62), and bearing (63) to bracket (64) to assemble

bracket support assembly (61).

7 Replace bearings (58) if damaged. Install lever (54) and bell crank (55) by pushing shaft (53) into bracket (56).

Install two new spring pins (52) to assemble bracket assembly (57).

8 Install nut (49) and tighten after screwing rod ends (50) onto shaft (51) to assemble rod assemblies.

9-45