TM-9-2520-254-34
TRANSMISSION, AUTOMATIC, ALLISON, MODEL TX100-1
TECHNICAL MAUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL
OCTOBER 1971
TM-9-2520-254-34 - Page 94 of 126
Figure 5-83
Figure 5-85
Figure 5-84
Figure 5-86
Install seal ring (A) on throttle shaft (B) and seal
ring (C) on selector shaft (D). Install throttle shaft
(B) into selector shaft (D).
Install selector shaft (A) and throttle shaft (B) into
transmission housing (C). Install snap ring (D) on
selector shaft (A) and snap ring (E) on throttle
shaft (B).
Position transmission housing (A) in work stand
4910-499-4196 (B) with rear end up. Using
handle—5120-316-9182 (7950864) (C), and
replacer 5120-572-8615 (8356185) (D), install
rear bearing into transmission housing (A).
Install bearing snap ring (A). Install seal (B) on
speedometer drive plug (C), and install assembly
into transmission housing (D).
5-44
Back to Top
