TM-9-2520-254-34
TRANSMISSION, AUTOMATIC, ALLISON, MODEL TX100-1
TECHNICAL MAUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL
OCTOBER 1971
TM-9-2520-254-34 - Page 95 of 126
Figure 5-88
Figure 5-90
Figure 5-89
Figure 5-87
Position transmission housing (A) so that front end
is up. Install oil pump guide bolts (B), speedometer
drive gear (C), and oil pump gasket (D). (Guide
bolts are part of set 4910-572-8710 (8356165).)
Assemble rear oil pump (A) as illustrated.
Lubricate gears (B) and (C), and install cover (D).
NOTE
Gears B and C should be installed in same
position as removed.
Install rear oil pump assembly (A) into housing (B)
using guide bolts (C). Install three bolts (D) and
three lockwashers. Remove guide bolts, and install
remaining two bolts and lockwashers. Tighten bolts
to 13 to 16 pound-feet torque. (Guide bolts are part
of set 4910-572-8710 (8356165)).
5-45
Back to Top
