TM-9-2520-254-34

TRANSMISSION, AUTOMATIC, ALLISON, MODEL TX100-1

TECHNICAL MAUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1971

TM-9-2520-254-34 - Page 104 of 126

Figure 5-122

Figure 5-121

Figure 5-123

Figure 5-124

Install twenty-four self-locking nuts (A). Tighten

nuts evenly to 19 to 23 pound-feet torque.

Install right and left power takeoff covers and

gaskets (A). Secure each cover with six bolts and six

plain washers. Tighten bolts to 15 to 20 pound-feet

torque.

Reposition transmission, bottom side up. Install

output flange (A), bolt (B), locktab (C), and seal

ring (D).

Using torque wrench (A), tighten bolt to 83 to 100

pound-feet torque while holding flange (B) with

tool (C). Remove tool (C).

5-54