TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 205 of 779

Remove

1. Remove one self-locking nut, pan head screw (A), and

holder attaching primary and secondary fuel drain

tubes together. Remove holder.

2. Remove primary fuel filter drain tube (B).

Install

1. Position primary fuel filter drain tube (B) on engine.

2. Position holder on tubes and install one self-locking

nut and pan head screw (A) in holder to secure tubes.

Figure

5-34.

Removing or installing primary

fuel filter drain tube.

Remove

1. Disconnect fuel outlet hose (A) from elbow.

2. Remove elbow and pipe reducer (B) from position

fuel filter outlet.

3. Remove four cap screws (C) and lock washers at

taching primary fuel filter to mounting bracket and

remove primary fuel filter.

Install

1. Position primary fuel filter against mounting bracket

and install four cap screws (C) and lock washers

securing filter to bracket.

2. Install elbow and pipe reducer (B) in filter outlet.

3. Connect fuel outlet hose (A) to elbow.

Figure 5-35. Removing or installing

primary fuel filter.

5-19