TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 209 of 779

Note.

Cylinder barrel shrouds for cylinders

No. lR and 6L are identical and are removed or

installed in the same manner.

Figure 5-42. Removing or installing cylinder

barrel shroud / cylinder No. lR.

Remove

1.

Remove two plate nuts (A).

2.

Remove five machine screws (B) attaching right front

shroud to cylinder and to cylinder No. 1R baffle.

Remove shroud.

Note.

Cylinder No. lR baffle will b e

disconnected when the five machine screws (B)

are removed.

Install

1. Position right front shroud on engine and install five

machine screws (B) securing shroud to cylinder and to

cylinder No. 1 R baffle.

2. Install two plate nuts (A).

Figure 5-43. Removing or installing right

front shroud.

5-23