TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 263 of 779

. .

Remove

Install

1. Hook suitable chain (A) or hoist into crankshaft

1. Hook suitable chain (A) or hoist into crankshaft

damper and oil filter housing lifting eyes.

damper and oil filter housing lifting eyes.

2. Take up housing weight on chain or hoist and separate

2. Take up housing weight on chain or hoist and position

housing (B) from crankcase assembly.

housing (B) on crankcase assembly.

Note. Do not allow housing to rest on studs

after housing is separated from crankcase and oil

transfer tubes.

Figure 5-139. Removing or installing crankshaft damper and

oil filter housing.

5-77