TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 274 of 779

Remove

1. Remove two starter mounting bolts (A).

2. Remove four eelf-locking nuts (B) and flat washers

attaching starter drive adapter (C) to crankcase

assembly.

3. Remove adapter (C) from crankcase.

4. Remove and discard gasket (D).

Install

1. Install new starter drive adapter gasket (D).

2. Position starter drive adapter (C) on crankcase

assembly.

3. Install four self-locking nuts (B) and flat washers

securing adapter (C) to crankcase.

4. Install two starter mounting bolts (A).

Figure 5-153. Removing or installing

starter drive adapter.

Remove

1. Remove cotter pin (A).

2. Remove slotted nut (B) attaching starter driven gear

to starter driven gearshaft.

Install

1. Install slotted nut (B) securing starter driven gear to

starter driven gearshaft.

2. Install cotter pin (A).

Figure 5-154. Removing or installing starter

driven gear attaching parts.

5-88