TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 276 of 779

Remove

1. Remove self-locking nut (A) and flat washer from

stud.

2. Remove five bolts (B) and lock washers attaching

generator drive adapter to crankcase assembly.

Install

1. Install five bolts (B) and lock washers securing

generator drive adapter to crankcase assembly.

2. Install self-locking nut (A) and flat washer on stud.

Figure 5-157. Removing or installing

generator drive adapter attaching parts-

engines with mounting bolts.

Remove

1. Remove generator drive adapter (A) with drive

gearshaft and bearings as a unit.

2. Remove and discard generator drive adapter gasket

(B).

Install

1. Install a new generator drive adapter gasket (B).

2. Install generator drive adapter (A) with drive gear-

shaft and bearings as a unit.

Figure 5-158. Removing or installing

generator drive adapter and associated parts.

5-90