TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 275 of 779

1. Install three 5 / 16-24 x 3 in. bolts (A) for use as

puller screws into threaded holes provided in starter

driven gear (B).

2. Alternately tighten bolts and pull driven gear (B) from

driven gearshaft.

Figure 5-155. Removing starter driven gear.

Remove

1. Remove self-locking nut (A) and flat washer from

stud.

2. Remove five self-locking nuts (B) and bolts attaching

generator drive adapter to crankcase assembly.

Install

1. Install five self-locking nuts (B) and bolts securing

generator drive adapter to crankcase assembly.

2. Install self-locking nut (A) and flat washer on stud.

Figure 5-156. Removing or installing

generator drive adapter attach parts-

engines with mounting nuts.

5-89