Figure 6-255
6-70. Time Totalizing Mete r
a. Inspection and Test.
Inspect the tim e
totalizing meter for dents or other deformitie s
which would impair its function. Test th e
totalizing meter to be sure it is functionin g
properly by connecting the meter electrica l
connection (fig. 6-255) to a 24 volt electrica l
system. The time totalizing meter is calibrated to
record the electrical impulse in tenths of an hour
and will numerically record every six minutes .
Allow sufficient passage of time to be certai n
hour counter is performing properly .
6-21 7